1. Open the box and choose the screw that matches the hole diameter of the screw at the bottom of the headset.

               

                                             

  1. After assembling the module as shown in the following, insert the screws from the red circle screw holes, and choose a suitable screwdriver to tighten the screws.

 

  1. After insertingthe module to Type-C, connect the headset with PC. Pitool will prompt that Hand tracking has been inserted and detected, and provide a driver download button.

 

  1. Click it and start to download the driver for handtracking module.

 

  1. Install the driver according to the instruction.

 

  1. Finished.(The hand tracking module icon will show as below)

 

  1. Demo APP

You can find many demo APPs here（ https://gallery.leapmotion.com/?unonce=02ec3785b5&uformid=54&s=uwpsfsearchtrg&skeyword=&taxo%5B0%5D%5Bname%5D=filters&taxo%5B0%5D%5Bopt%5D=1&taxo%5B1%5D%5Bname%5D=types&taxo%5B1%5D%5Bopt%5D=1&taxo%5B2%5D%5Bname%5D=platform&taxo%5B2%5D%5Bopt%5D= ）

  1. Some Games on SteamVR with handtracking support：

https://store.steampowered.com/app/512420/Wave_Magic_VR/

https://store.steampowered.com/app/457550/Bigscreen_Beta/

https://store.steampowered.com/app/737260/Coaster_of_Carnage_VR/

https://store.steampowered.com/app/862390/FlyInside_Flight_Simulator/

  1. SDK download： https://pitool.pimax.com/Leap_Motion_Setup_4.0.0%2B52173.exe